Electric shock, fumes, arc rays, fire and burns – a practical checklist for welders, helpers and workshop owners.
Stick welding is simple, but it involves electricity, intense light, hot metal and fumes. A few habits prevent almost all accidents.
Electric shock
- Never touch the electrode or live parts with bare skin or wet gloves.
- Check cables, holder and earth clamp for cuts and loose joints every day.
- Don't weld standing in water or on a wet floor – use a dry board or mat.
- Switch off the machine before changing settings or leaving it.
Arc rays
- Helmet or shield with the right filter, every time – even for one tack.
- Safety glasses under the helmet.
- Screens around the work so helpers and passers-by are protected. See arc eye first aid.
Fumes
- Keep your head out of the fume plume.
- Weld in a well-ventilated area or use a fan or extractor that pulls fumes away from you.
- Take extra care with galvanised, painted or oily metal – clean it first.
Fire
- Move flammable material at least 10 m away or cover it with fire-resistant sheets.
- Keep a fire extinguisher or sand bucket nearby.
- Never weld on drums or tanks that held fuel, oil or chemicals until they are properly cleaned.
- Check the area for smouldering material after you finish.
Burns and PPE
- Full sleeves in cotton or flame-resistant cloth – synthetic clothing melts.
- Leather gloves and closed leather shoes.
- Put hot stubs in a metal bin, not on the floor.


