0
Home › Electrodes › Mentrode 7018

Mentrode E7018 Electrodes

Low-hydrogen, iron-powder electrode for high-strength welds on structural work, pressure parts and critical joints.

AWS A5.1 E7018IS 814 EB5426H3JXAC / DC+Low hydrogen · iron powder
ClassificationAWS A5.1 E7018
IS 814EB5426H3JX
CoatingBasic, iron powder
CurrentAC (OCV ≥ 70 V) / DC+
PositionsAll except vertical-down
Metal recovery~110 %
About this electrode

High strength for critical joints

Mentrode 7018 is an iron-powder, low-hydrogen electrode for structural and heavy fabrication. It gives sound, crack-resistant welds with a smooth, low-spatter arc and good deposition rate.

  • Low-hydrogen deposit for crack-resistant welds
  • Iron powder coating – about 110% metal recovery
  • Smooth, stable arc with very low spatter
  • Easy slag removal on all passes
  • Suitable for medium-to-heavy sections (6–25 mm)
Typical applications

Where it's used

I-beams, H-beams & heavy structures
Pressure vessels & boilers
Storage tanks
Medium-to-thick plate
Construction & PEB
Repair & maintenance
Sizes & welding current

Recommended parameters

DiameterLengthCurrent (A)MarketPositions
2.5 mm350 mm70 – 110IndiaAll except vertical-down
2.6 mm350 mm70 – 110ExportAll except vertical-down
3.15 mm350 / 450 mm90 – 140IndiaAll except vertical-down
3.2 mm350 / 450 mm90 – 140ExportAll except vertical-down
4.0 mm450 mm140 – 190India & ExportAll except vertical-down
5.0 mm450 mm190 – 250India & ExportFlat & horizontal

Use the lower end of the range for vertical and overhead welding. Not recommended for vertical-down welding.

Mechanical properties

All-weld metal, as welded

IN-HOUSE TEST · VAM QC LAB · UTM
PropertyResultAWS A5.1 requirement
Tensile strength518 MPa≥ 490 MPa
Yield strength414 MPa≥ 400 MPa
Elongation28 %≥ 22 %
Impact (Charpy V) at −29 °C≥ 27 J*≥ 27 J

* Minimum requirement as per AWS A5.1. Measured impact values will be updated after current testing.

Weld metal chemistry (%)

Chemical composition

AWS A5.1 LIMITS · TEST RESULTS TO BE UPDATED
C–max 0.15
Si–max 0.75
Mn–max 1.60
P–max 0.035
S–max 0.035

Storage & re-drying

  • Store dry, below 60% humidity, in sealed packets.
  • Re-dry at 300–350 °C for 1 hour before use.
  • Keep re-dried electrodes in a holding oven at 100–150 °C until use.

Safety

  • Wear a welding helmet, gloves and full-sleeve protective clothing.
  • Weld with good ventilation or fume extraction.
  • Keep holder, gloves and cables dry.
  • See the safe use guide and the Safety Data Sheet.

Packing

SizeIndiaExport
2.5 / 2.6 mm2.5 kg × 85 kg × 4
3.15 / 3.2 mm2.5 kg × 85 kg × 4
4.0 mm2.5 kg × 85 kg × 4
5.0 mm2.5 kg × 85 kg × 4

Packet weight × packets per box. India: 20 kg box of 8 packets. Export: 20 kg carton of 4 packets. Vacuum packing available on request.

Need Mentrode 7018 for your next job?

Talk to the team that makes it – quotes, bulk orders, export and white label.

Other Mentrode electrodes
Items have been added to cart.
One or more items could not be added to cart due to certain restrictions.
Added to cart
Quantity updated
- An error occurred. Please try again later.
Deleted from cart
- Can't delete this product from the cart at the moment. Please try again later.