0
Home › Electrodes › Mentrode 7016

Mentrode E7016 Electrodes

Basic-coated, low-hydrogen electrode for tough, crack-resistant welds on structural steel and machinery.

AWS A5.1 E7016IS 814 EB5426H3XAC / DC+Low hydrogen
ClassificationAWS A5.1 E7016
IS 814EB5426H3X
CoatingBasic, low hydrogen
CurrentAC (OCV ≥ 70 V) / DC+
PositionsAll except vertical-down
Sizes2.5 – 5.0 mm
About this electrode

Low hydrogen strength, with a forgiving arc

Mentrode 7016 is a potassium-based, low-hydrogen electrode for welding mild and medium-tensile steels where crack resistance matters. It runs well on AC and DC+, with a fast-freezing puddle that suits root passes and tight joints.

  • Low-hydrogen deposit for crack-resistant welds
  • Runs on AC transformers as well as DC+
  • Fast-freezing puddle – good for root passes and tight joints
  • Medium-to-deep penetration
  • Easy slag removal
Typical applications

Where it's used

Structural steel
Machinery & equipment
Tanks & vessels
Boilers & storage tanks
Medium-to-heavy fabrication
Repair & maintenance
Sizes & welding current

Recommended parameters

DiameterLengthCurrent (A)MarketPositions
2.5 mm350 mm60 – 90IndiaAll except vertical-down
2.6 mm350 mm60 – 90ExportAll except vertical-down
3.15 mm350 mm90 – 130IndiaAll except vertical-down
3.2 mm350 mm90 – 130ExportAll except vertical-down
4.0 mm450 mm130 – 180India & ExportAll except vertical-down
5.0 mm450 mm180 – 240India & Export (on order)Flat & horizontal

Use the lower end of the range for vertical and overhead welding. Not recommended for vertical-down welding.

Mechanical properties

All-weld metal, as welded

INDEPENDENT LAB · SETSCO SINGAPORE · 2026
PropertyResultAWS A5.1 requirement
Tensile strength557 MPa≥ 490 MPa
Yield strength471 MPa≥ 400 MPa
Elongation23 %≥ 22 %
Impact (Charpy V) at −29 °C≥ 27 J*≥ 27 J

* Minimum requirement as per AWS A5.1. Measured impact values will be updated after current testing.

Weld metal chemistry (%)

Chemical composition

INDEPENDENT LAB · SETSCO SINGAPORE
C0.08max 0.15
Si0.57max 0.75
Mn1.18max 1.60
P0.020max 0.035
S0.008max 0.035

Storage & re-drying

  • Store dry, below 60% humidity, in sealed packets.
  • Re-dry at 300–350 °C for 1 hour before use.
  • Keep re-dried electrodes in a holding oven at 100–150 °C until use.

Safety

  • Wear a welding helmet, gloves and full-sleeve protective clothing.
  • Weld with good ventilation or fume extraction.
  • Keep holder, gloves and cables dry.
  • See the safe use guide and the Safety Data Sheet.

Packing

SizeIndiaExport
2.5 / 2.6 mm2.5 kg × 85 kg × 4
3.15 / 3.2 mm2.5 kg × 85 kg × 4
4.0 mm2.5 kg × 85 kg × 4
5.0 mm*2.5 kg × 85 kg × 4

Packet weight × packets per box. India: 20 kg box of 8 packets. Export: 20 kg carton of 4 packets. Vacuum packing available on request. *5.0 mm made on order.

Need Mentrode 7016 for your next job?

Talk to the team that makes it – quotes, bulk orders, export and white label.

Other Mentrode electrodes
Items have been added to cart.
One or more items could not be added to cart due to certain restrictions.
Added to cart
Quantity updated
- An error occurred. Please try again later.
Deleted from cart
- Can't delete this product from the cart at the moment. Please try again later.