Why eyes burn after welding, what to do for arc eye, UV skin burns and spatter burns – and how to prevent them.
Many welders and helpers in small workshops weld without a proper helmet or safety glasses – just for a "quick tack". That quick tack is often what causes painful eyes that night. This guide explains what is happening and what to do.
Arc eye (welder's flash)
The welding arc gives off strong ultraviolet (UV) light. It burns the clear front surface of the eye (the cornea) – like sunburn of the eye. Helpers and people standing nearby get it too, not just the welder.
Symptoms
They usually start a few hours after exposure, often at night:
- Feeling of sand or grit in the eyes
- Pain, redness and watering
- Sensitivity to light, difficulty keeping eyes open
- Blurred vision
First aid
- Don't rub your eyes.
- Rest in a dim or dark room with eyes closed.
- Place a cool, clean, damp cloth over the closed eyes.
- Remove contact lenses if you wear them.
- Don't put home remedies, breast milk, oil or leftover drops into the eye.
- See a doctor – they can examine the eye and give the right treatment. Most mild cases heal within one to two days, but go back immediately if pain or vision gets worse.
Something in the eye
For slag, grinding dust or spatter in the eye, rinse with plenty of clean water. Don't try to remove anything stuck in the eye – cover it lightly and get medical help.
UV skin burn
Bare arms and neck turn red and sore, like sunburn, after welding without sleeves. Cool the skin with clean water, keep it covered from further exposure and see a doctor if it blisters badly.
Spatter and hot-metal burns
- Cool the burn under cool running water for about 20 minutes.
- Remove rings or tight items near the burn before it swells.
- Don't use ice, toothpaste, oil, butter or turmeric – they trap heat or cause infection.
- Cover loosely with a clean, non-fluffy cloth or cling film.
- Get medical help for large, deep or blistered burns, and burns on the face, hands or joints.
Prevention is simple
- Use a helmet or shield with the right filter shade (generally 10–13 for stick welding), even for short tacks.
- Wear clear safety glasses under the helmet – they protect from flying slag when chipping.
- Give helpers a shield or dark glasses rated for welding, and use screens to protect people nearby.
- Wear full sleeves in cotton or flame-resistant cloth, gloves and closed shoes.
Read our workshop safety guide and download the Mentrode Welding Safety Guide.


